From the novices to the pros, talk about engine technology.
I have used pipemax for designing headers and have a couple of questions about 4 and 6 cyl race engines. Firstly is the question on VE...
New 4stroke engine: New 4 Stroke Engine Regards Andrew :D
A friend of mine sent me to this site so I could voice my opinion (Piss People Off) As I do so well, and I noticed the name David Vizard, having...
Here is the test that David Vizard and Terry Walters did for VP Fuels with DV’s 496 BB Chevy books front cover budget build street motor to see just...
Talking about a original iron block with ProFiler aluminum heads with 11.20:1 static compression and Total Seal rings. Block is 3/4 filled with Hard...
Ok, so what I've learned as of now is that a booster is the heart of a carburetor. I know guys are sucessfully running screen after their carb for...
For tuning a collector for proper length it has been stated that you can use a termination box. From what I have read the minimum volume is supposed...
Just spent 4 days with a new model Kawasaki 250cc 4strk dirt bike on the dyno testing. Had to prove to this customer how the dimpled valves work,...
check this out what do you guys think? SOMENDER-SINGH.com - Grooves 101
CLEVELAND, Ohio – Complete Retro Tach Cup Kits (NC5R) are available from Sunpro to refurbish ‘60s-and ‘70s-era Sun Super Tachs with a new cup and...
I am interested in designing a new series of small motors for ATV's, UTV's, etc. I am looking at 2 valve Nascar style head verses 4 valve F1 type...
I'll start this thread with a quote form Neels van Niekerk, find a link to the writing below. "Without turbulence in the combustion chamber we...
How many degrees can I expect the oil temp to drop with the highest capacity oil cooler that is available. The oil is 6 quarts, and right now will...
When the distributor is on the bench, I can hold the gear and twist the advance mechanism to full advance. The autocam/weights etc always returns...
I've been reading through the forum for about a week now. I'm fascinated with the threads on squish for some reason, more so than any other of the...
Hello guys......! I have a new 4 stroke engine motorcycle and there is gasoline leaking into the oil pan. what can be the reason for this ? Please...
If someone knows how to look up the patent or the name,it'll give a better description. Basically what is is,or was, is a piece of 3m rubber,shaped...
Does anyone have experience in tuning ITBs? Alpha-N tuning seems to be one of the more accepted methods, but I don't know if that will give me as...
Do any of you guys know if D.V.'s book on carbs and intakes(how to build hp vol. 2) has a section on 2bbl restricted engines? was considering buying...
I need some help with some combonations to build a motor to take a 3100 lb car into the 5 seconds in the 1/8th mile.any help would be greatly...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
