Quote:
Originally Posted by automotivebreath
It's truly amassing what these people can do with the gen1 SBC!
A/ND 6.81 192.25 03/03/07
Craig Bourgeois - Metairie, LA
NoProblemRaceway Belle Rose, LA
w/16:1 CR = 872 peak HP 8900-9000 RPM
 |
That Run was with 946 HP @ 9000 to 9200 RPM...pretty flat at high RPMs
600 Peak TQ @ 600 RPM/SEC
i start the Pull at 8000 RPM to 9500
the Dyno Graph just shows basically 2 straight parallel lines running across
With New Engine Mods=>
Now 970+ Peak HP with 600 TQ....but now very limited to what
Traction DragStrip's surface will give to 12" wide Slicks.
De-Tune Engine to 900's to 940 HP on marginal Traction conditions
by reducing Ign Timing + other things