|
There are so many variables and opinions it gets confusing. Throwing rod length
in the mix adds to the countless variables that must be considered. I’m
searching for some sort of standard. If you do this, you can expect this; is
seems quite simple. As David said early on “…the overall picture is not quite as
simple as it at first may seem…”
If you look at aftermarket combustion chambers for the SBC, every
manufacturer uses a completely different design. How can they all be right, or
perhaps they design for different goals in mind? Compare the open chamber
design of Brodix to the closed chamber of the RHS, 23 degree SBC. Surely one
must be better than the other. Can the average consumer look at the layout
and chose the best design for his application, I think not.
|